Ff8 1 02: System Speed Dial (Ssd); Table 8-9. Keys For Speed-Dial Number Entry - Panasonic DBS-576 Technical Manual

FF8: Maintenance
Introduction

FF8 1 02: System Speed Dial (SSD)

0
SSD Numbers
System
Configuration
(all CPCs) - Version 1.0 or higher
Assign System Speed Dial (SSD) codes for the system.
FF1
FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
System
FF2
Trunks
Notes:
Speed Dial numbers can contain up to 24 characters. The following table shows which keys to use for
FF3 entering special characters.
Extensions

Table 8-9. Keys for Speed-Dial Number Entry

To indicate...
FF4
Digit or character
FF-/Soft Keys
Intercom Level
MCO Code 9
MCO Code 81
FF5
MCO Code 82
Groups
MCO Code 83
MCO Code 84
Pause
FF6
DP - DTMF Code
TRS/ARS
SSD Code
Hyphen (-)
Display Number (Start/Stop)
FF7
Applications
Special Instructions for Large-Display Phones:
When you enter this address, the display on the Large-LCD phone will change to HYPHEN (soft key
#3), PAUSE (soft key #4), and SPD-ID (soft key #5) so you can enter these characters into the SSD
FF8
phone number. (On non-display or small-display phones, use the one-touch keys #3 thru #5 for entering
Maintenance
these characters.)
"SPD-ID" represents AUTO, which must precede each special code you enter into the phone num-
ber (such as another SSD/PSD code, Account Code, etc.).
When you press soft key #3 (HYPHEN) to enter a hyphen, it will display as F. Pressing soft key #4
Appendix A (PAUSE) will display as R. Pressing soft key #5 (SPD-ID) will display as A.
Appendix B
Page 8-46
SSD Code (Bin No.)
range: 00-79 or 000-799
Enter...
0, 1 - 9, *, #
AUTO * #
AUTO * 0
AUTO * 71
AUTO * 72
AUTO * 73
AUTO * 74
REDIAL
AUTO **
AUTO NN(N)
PROG
AUTO * 2
DBS 576 (USA) issued 05/20/98
Section 400-Programming
 +++
(clears current
data)
Phone No. stored in SSD bin
(up to 24 char.)
Introduction
0
System
Configuration
+++
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400