Panasonic DBS-576 Technical Manual page 181

Section 400-Programming
Introduction
Outpulse Delay Timer (analog CO)
(all CPCs) - Version 1.0 or higher
Set the length of a pause before outpulsing dialed digits for speed dial, or
0
after an analog CO trunk is seized in a MCO trunk group.
System
Configuration
FF1
System
FF2
Trunks
Notes:
FF3
Extensions
Related Programming:
FF4
FF-/Soft Keys
Outpulse Delay Timer (analog Tie-Lines/
FF5
(Immediate-Start)
Groups
(all CPCs) - Version 1.0 or higher
Set the length of a pause before outpulsing dialed digits on an analog tie-line trunk
set for Immediate-Start signaling.
FF6
TRS/ARS
FF7
Applications
FF8
Notes:
Maintenance
Related Programming:
FF2 0: Analog Trunks (E&M Tie) (pg. 2-37)
Appendix A
Appendix B
576-13-400
FF1 1 01 0007 Hold (1-255) Hold
FF1 1 01 0008 Hold (1-255) Hold
DBS 576 (USA) issued 05/20/98
FF1: System Programming
%
, , #
1=1 second
2=2 seconds
...
255=255 seconds (or 4 min./15 sec.)
default: 3 seconds

, , / %
1=1 second (default)
2=2 seconds
...
255=255 seconds or 4 min./15 sec.
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 1-119