Panasonic DBS-576 Technical Manual page 180

FF1: System Programming
Introduction
Call Duration Timer (analog CO)
(all CPCs) - Version 1.0 or higher
Set the length of time the system will wait before starting call duration timing for
0
outbound CO analog trunk calls, if the CO does not send back an answer signal
System
Configuration
when the called party answers.
FF1
System
FF2
Trunks
Notes:
FF3
Extensions
Related Programming:
FF4
Call Duration (pg. 2-19) for analog CO trunks
FF-/Soft Keys
Call Duration Timer (Tie-Lines)
FF5
(all CPCs) - Version 1.0 or higher
Groups
Set the length of time the system will wait before starting call duration timing for
outbound tie-line calls, if the called-party end does not send back an answer signal.
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Notes:
Related Programming:
Appendix A
Appendix B
Page 1-118
FF1 1 01 0005 Hold (1-255) Hold
FF1 1 01 0006 Hold (1-255) Hold
DBS 576 (USA) issued 05/20/98
1=1 second
2=2 seconds
...
255=255 seconds (or 4 min./15 sec.)
default: 10 seconds
FF2 0 BSSC 02 03 Hold (0 or 1) Hold
1=1 second
2=2 seconds
...
255=255 seconds (or 4 min./15 sec.)
default: 10 seconds
Section 400-Programming
,, -! #

/;  1 % *
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B