Panasonic DBS-576 Technical Manual page 521

Section 400-Programming
Introduction
Closed Number Table: Follow Digit Maximum
(all CPCs) - Version 1.0 or higher
Specify the maximum number of digits that can be dialed after a Closed Number.
0
System
Configuration
FF6 2 07 (001-150)
FF1
System
FF2
Trunks
Notes:
FF3
Related Programming:
Extensions
Closed Number Table: Digit String (pg. 6-42)
FF4
FF-/Soft Keys
Closed Number Table: TRS Level
(all CPCs) - Version 1.0 or higher
FF5
Assign a TRS Level to each Closed Number.
Groups
FF6
TRS/ARS
FF7
Applications
Notes:
FF8
If a TRS Level is assigned here, the system will check the setting in TRS Level for Originator (ARS/
Maintenance
TRS) (pg. 6-18).
TRS Level 9 allows all calls, so it is not included here.
Related Programming:
Appendix A
TRS Level for Originator (ARS/TRS) (pg. 6-18)
Appendix B
576-13-400
Closed Number Entry:
001=Closed Number #1
002=Closed Number #2
...
150=Closed Number #150
FF6 2 07 (001-150)
Closed Number Entry:
001=Closed Number #1
002=Closed Number #2
...
150=Closed Number #150
DBS 576 (USA) issued 05/20/98
0002 Hold (0-16)
Maximum Number of dialed digits
after the Closed Number
default: 0 (no accumulated dial)
FF6 2 07 (001-150) 0001 Hold (1-4 digits) Hold
0003 Hold (0-8)
TRS Level 0-8
default: 0 (restrict all
FF6 1 01 (01-50) 0001 Hold (0-9) Hold
FF6: TRS/ARS
 "!,,!; 1%
Hold
 % 5(,
Hold
outbound calls)
Page 6-43
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B