System Size - Panasonic DBS-576 Technical Manual

Section 400-Programming
0: System Configuration Addresses
Introduction

System Size

0
System
(all CPCs) - Version 1.0 or higher
Configuration
Enter the number of cabinets installed in the phone system configuration.
FF1
System
FF2
Notes:
Trunks
See
General Notes
IMPORTANT: Once the number of cabinets is entered in this address, it is not possible to reduce the
FF3
number of cabinets later.
Extensions
Related Programming:
FF4
FF-/Soft Keys
Free Slot Assignment
FF5
(all CPCs) - Version 1.0 or higher
Groups
Enter the type of card installed in each Free Slot of the cabinet.
FF6
TRS/ARS
FF7
Applications
Notes:
See
General Notes
FF8
The first time you install a card into a Free Slot, and nothing is programmed for it (no port settings, etc.),
the system will automatically detect the card.
Maintenance
Related Programming:
Card Reset (pg. 8-23)
Card Type Verification (pg. 8-23)
Appendix A
Card Version Verification (pg. 8-24)
T1 Loopback 1 Diagnostics (pg. 8-34)
T1 Loopback 2 Diagnostics (pg. 8-34)
Appendix B
576-13-400
00 Hold (1-6) Hold
(pg. 0-2).
01 (1-6) (01-12)
Cabinet No. 1-6
Free Slot No. 1-12
(see figure, next page)
(pg. 0-2).
FF8 0 04 0 BSS Hold (0 or 1) (Flash + Hold)
FF8 0 04 1 BSS 00 Hold [01-99 displays]
FF8 0 04 1 BSS 01 Hold [Version No. displays]
FF8 0 05 3 BSS(C) Hold (0 or 1) Hold
FF8 0 05 4 BSS(C) Hold 1 Hold
DBS 576 (USA) issued 05/20/98
Number of Cabinets Installed
Hold (1-99) Hold
Card Type No.
(see table, next page)
0: System Configuration
 
 ! "
Page 0-5
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B