Message Waiting Led - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

Message Waiting LED

(all CPCs) - Version 1.0 or higher
Enable/Disable Message Waiting LED on the extension for messages received
0
from other extensions.
System
Configuration
FF1
System
FF2
Trunks
Notes:
Even if this is set to "Disable," the phone's LCD display will indicate the Message-Waiting.
FF3
(all CPCs - Version 1.3 and higher)
Extensions
having to switch to Tone calling.
Related Programming:
FF4
Extension COS: Message Waiting Send (pg. 1-55)
FF-/Soft Keys
FF5
Data Security
Groups
(all CPCs) - Version 1.0 or higher
Enable/Disable interruptions such as Busy Override-Receive on this extension.
FF6
TRS/ARS
FF7
Applications
FF8
Notes:
Maintenance
Set this address to "1" (Do not allow intterruptions) to protect data transmissions from being
interrupted.
Related Programming:
Appendix A
Appendix B
576-13-400
FF3 0 BSSC 04 09 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
Message-Waiting can now be sent during a Voice call without first
FF3 0 BSSC 04 10 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
FF3: Extension Programming
(0 or 1) Hold
0=Disable Message Waiting LED.
1=Enable Message Waiting LED. (default)
FF1 0 03 (00-15) 25 Hold (0 or 1) Hold
(0 or 1) Hold
0=Allow interruptions on this extension.
(default)
1=Do not allow interruptions.
Introduction
$  &
2A 5* !!,
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
$ 
Groups
 '-
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 3-13
System