Panasonic DBS-576 Technical Manual page 89

Section 400-Programming
Related Programming:
Introduction
0
System
ARS/LCR Setting
Configuration
(all CPCs) - Version 1.0 or higher
Set whether Automatic Route Selection (ARS) will apply to outbound calls
FF1
using the 1st-priority (MCO-1) trunk access code ("9" by default).
System
FF2
Trunks
Notes:
FF3
Extensions
If this address is set to "0" (ARS will not apply), the system will seize a trunk in MCO-1's assigned
trunk group.
If this address is set to "1" (ARS will apply), the system will look in the ARS tables for a match after the
FF4
phone number is dialed.
FF-/Soft Keys
Related Programming:
Extension COS: Forced ARS (pg. 1-68)
FF5
Tenant Group MCO Access: Outbound Trunk Groups (pg. 1-164)
Groups
Hold
MCO-Outbound Trunk Group Members (pg. 5-18)
FF6 0: TRS/ARS Common (pg. 6-5)
FF6 2: ARS Settings (pg. 6-25)
FF6
TRS/ARS
Advanced Routing for MCO Access
FF7
Applications
(all CPCs) - Version 1.0 or higher
Enable/Disable Advanced Routing for MCO trunk access.
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF1 0 02 0010 Hold (0 or 1) Hold
0=ARS will not apply to MCO-1 access code. (default)
1=ARS will apply to MCO-1 access code.
FF1 0 02 0011 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
FF1 0 03 (00-15) 42 Hold (0 or 1) Hold
FF1 3 01 (0001-0360) Hold (0-99 or 0-72)
FF5 2 (01-99) (002-577) Hold (1-576) Hold
0=Disable Advanced Routing. (default)
1=Enable Advanced Routing.
FF1: System Programming
/05
!- / ('
Page 1-27
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B