Auto Fill Incr - HP 8360 User Handbook Manual

Auto Fill Incr

Function Group
Menu Map 2,s
Description
Programming Codes
See Also
HP 8360
User's Handbook
FREQUENCY, POWER
This softkey is used in two locations: Fitness Menu and
List Menu.
Flatness Menu - When selected, the synthesizer waits for a frequency
increment value to be entered. --> Increment:
the active entry area. A list of frequencies is created automatically,
beginning at the auto fill start frequency and always ending with the
auto fill stop frequency. The synthesizer uses the increment value on
all points, but if the stop frequency requires a different increment to
be used to be exact, the synthesizer simply ends the frequency list at
the stop frequency disregarding the increment value.
If the increment value requested creates a list that exceeds the
number of elements available, the following message appears:
TOO MANY CORRECTION PTS REQUESTED
List Menu - When selected, the synthesizer waits for a frequency
increment value to be entered. --) Increment:
the active entry area. A list of frequencies is created automatically,
with all points separated by the frequency increment value. The list
begins at the auto fill start frequency and ends at a frequency less
than or equal to the auto fill stop frequency.
If the increment value requested creates a list that exceeds the
number of points available (801), the following message appears:
TOO MANY LIST PTS REQUESTED
Analyzer: NONE
Fltness Menu, List Menu
"Optimizing Synthesizer Performance" in Chapter 1.
Operating and Programming Reference A-23
Auto Fill Incr
is displayed in
is displayed in