Saving And Recalling An Instrument State - HP 8360 User Handbook Manual

Saving and
Recalling an
Instrument State
1-16 Getting Started Basic
The save/recall registers store and access a previously set instrument
state. For example, set the synthesizer to sweep from 3 to 15 GHz at
a -10 dB power level, with markers 1 and 2 set at 4.5 and 11.2 GHz.
Press [START) (7J (GHz).
Press (STOP) (7J (?J (GHz.
P r e s s
(
P O W E R
Press (MARKER).
Select Marker Ml @ 0 @ IGHz).
Select Marker M2 0 0 0 @ (GHzl.
To save this instrument state in register 1, press (SAVE) (iJ. To verify
that the synthesizer has saved this state:
Press (PRESET).
Press (RECALL) (iJ.
Press [MARKER).
The active entry area displays:
Notice the sweep end points, power level, and the asterisks next to
the marker 1 and 2 key labels.
You can save instrument states in registers 1 through 8. Register
0 saves the last instrument state before power is turned off. When
power is turned on, register 0 is automatically recalled.