Doubler Amp Mode Off - HP 8360 User Handbook Manual

Programming Codes
See Also

Doubler Amp Mode Off

Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User's Handbook
POWer:AMPLifier:STATE:AUTO ONlOFF[Oll
POWer:AMPLifier:STATE:AUTO?
Analyzer:
NONE
POWER
5
This softkey is applicable to instrument models with a doubler
installed. The doubler has an integral amplifier whose operation is
controlled by the instrument firmware. This softkey turns off the
automatic mode of operation and turns off the amplifier so that it is
never used. This is an unspecified mode of operation since the output
power may not be at the maximum leveled output power specification
at frequencies generated in the doubled mode. This softkey has no
effect on instruments without a doubler.
An asterisk next to the key label indicates that this feature is active.
POWer:AMPLifier:STATE ON(OFF(O(1
POWer:AMPLifier:STATE?
Analyzer:
NONE
Menu
Dblr hnp
Doubler Amp Mode Off
Operating and Programming Reference D-9