HP 8360 User Handbook Manual page 249

Function Group
Menu Map 3
Description
See Also
HP 8360
User's Handbook
MENU SELECT
This hardkey allows access to the marker functions.
Causes the synthesizer to display markers as an
amplitude pulse.
Changes the synthesizer's center frequency to
the value of the most recently activated marker.
Display the frequency difference between the
Delta Marker
active marker and the marker designated by the
Reveals the softkeys in the delta marker
Delta Mkr Ref
reference menu.
Causes the synthesizer to sweep from Ml to M2.
Makes Ml frequency the active function.
Marker Ml
Makes M2 frequency the active function.
Marker M2
Makes M3 frequency the active function.
Marker M3
Makes M4 frequency the active function.
Marker M4
Makes M5 frequency the active function.
Marker M5
Turns off all markers.
Markers A11 Off
Changes the synthesizer start and stop
frequencies to the values of Ml and M2.
The markers are functional whenever an asterisk appears next to the
key label, but only one marker can be active at a time. The active
marker is indicated in the active entry area.
"Marker Operation," in Chapter 1.
"Programming Typical Measurements," in Chapter 1.
Operating and Programming Reference M-3