Freq Mult - HP 8360 User Handbook Manual

FREQUENCY (MENU)
See Also

Freq Mult

Function Group
Menu Map 2
Description
Freq Offset
List Menu
Step Swp Menu
Up/Down Size Swept
zoom
"Optimizing Synthesizer Performance" in Chapter 1.
FREQUENCY
This softkey lets you set a frequency multiplier value and applies it to
all frequency parameters. Any integer value between and including
it does not affect the output of the synthesizer.
For example:
1. Set the start frequency to 4 GHz.
2. Set the stop frequency to 10 GHz.
3. Set the frequency multiplier to 5.
Note that the display indicates start=20 GHz, stop=50 GHz and
asterisks appear next to the frequency data.
4. Now set the stop frequency to 30 GHz. The synthesizer frequency
is 6 GHz, or 30 GHz + 5.
Frequency multiplier and offset are related as shown by the following
equation:
Entered value or Displayed Frequency = (Frequency
Generated x Multiplier) + Offset value
Sets the frequency offset value and applies
it to all frequency parameters.
Displays the frequency list create/edit
softkeys.
Reveals the stepped frequency sweep edit
soft keys.
Sets the frequency step size in the CW
frequency mode.
Sets the frequency step size in the swept
frequency mode.
Places the synthesizer in the CF/AF sweep
mode, where the rotary knob and numeric
entry keys control CF, and the up/down
arrow keys control AF.
HP 8360
User's Handbook