HP 8360 User Handbook Manual page 379

Tracking Menu
Function Group
Menu Map
Description
Programming Codes
See Also
Function Group
Menu Map 7
Description
HP 8360
User's Handbook
POWER, USER CAL
5, 9
In the menu structure there are two occurrences of this softkey. One
occurs in the POWER (K], the other occurs in the USER CAL
(MENU). Both softkeys operate the same way. These softkeys access
the tracking menu.
Realigns the synthesizer's output filter and
Auto Track
oscillator to maximize output power for the
swept frequency mode.
Periodically realigns the synthesizer's output
Peak RF Always
filter and oscillator to maximize output power
for the CW frequency mode.
Realigns the synthesizer's output filter and
Peak RF Once
oscillator to maximize output power for the
CW frequency mode.
SCPI: NONE
Analyzer: ,NONE
"Using the Tracking Feature," in Chapter 1.
SWEEP
This softkey lets you specify the amount of time after phase-lock
before a trigger pulse is sent out of the TRIGGER OUTPUT BNC.
The delay can be set from 0 to 3.2 seconds. An asterisk next to the
key label indicates this feature is active.
Operating and Programming Reference T-3