Power(E - HP 8360 User Handbook Manual

POWER (iZiG)
Function Group
Menu Map 5
Description
Programming Codes
See Also
HP 8360
User's Handbook
POWER
This hardkey accesses the power function softkeys.
Power Offset
Power Slope
Power Sweep
Set Atten
Tracking Menu
All RF power functions except for power level, flatness on/off, and
RF on/off are contained in the power menu.
SCPI:
NONE
Analyzer:
NONE
"Getting Started Basic" and "Getting Started Advanced," in
Chapter 1.
"Programming Typical Measurements," in Chapter 1.
Accesses the softkeys in the flatness
correction menu.
Changes the displayed power to include
an offset, but does not change the
output power of the synthesizer.
Activates the linear, power-per-frequency
mode of power output, and makes RF
slope (dB/GHz) the active function.
Activates power sweep mode and makes
power sweep (dB/swp) the active
function.
Activates uncoupled attenuator as
the mode of operation and makes the
attenuator value the active function.
Accesses the softkeys in the tracking
calibration menu.
Uncouples the attenuator from the ALC
system.
Allows you to enter values for the power
level step size.
/ ], (
ON OFF POWER LEVEL
Operating and Programming Reference P-5
),
and