HP 8360 User Handbook Manual page 371

Programming Codes
See Also
Sweep Mode List
Function Group
Menu Map
Description
Programming Codes
See Also
Sweep Mode Ramp
Function Group
Menu Map 7
Description
HP 8360
User's Handbook
SCPI: NONE
Analyzer: NONE
"Programming Typical Measurements," in Chapter
SWEEP
7
This softkey activates the step frequency list mode. To use this type
of sweep, a frequency list must have been entered, otherwise an error
message appears. In this mode, the synthesizer steps only those
frequencies defined by the frequency list. An asterisk next to the key
label indicates that this feature is active.
SCPI: FREQuency:MODE LIST
Analyzer: SN
CONNECTORS, List Menu
"Creating and Using a Frequency List," in Chapter
SWEEP
This softkey activates the analog frequency sweep mode. Ramp
sweep mode is the factory preset state. An asterisk next to the key
label indicates that this feature is active.
Operating and Programming Reference S-73
Ramp
Mode
1.
1.