Table of Contents
Advertisement
Peak RF Once
Function Group
Menu Map 5,9
Description
Programming Codes
See Also
Function Group
Menu Map
Description
POWER, USER CAL
This softkey appears in two locations: the POWER Tracking Menu
and the USER CAL Tracking !lenu . The operation is the same in
both locations.
This softkey causes an instantaneous, one-time execution of the
peaking function when the synthesizer is in the CW or manual sweep
mode. It aligns the output filter (SYTM) so that its passband is
centered on the RF output.
SCPI:
Analyzer:
SHAK
Auto Tracking, Peak RF Always, Tracking Menu
"Optimizing Synthesizer Performance," in Chapter 1.
POWER
NONE
This hardkey lets you control the output power level of the
synthesizer. The synthesizer has different power leveling modes and
leveling points, and as such, the
aspects of the power level (ALC) system.
The following is an explanation of power level operation in the
different ALC system configurations.
Normal, Internal,
In
the
power level of the synthesizer directly. The attenuator (if present)
is controlled together with the complete range of the ALC system
[
),
When you press
POWER LEVEL
X . XX dBm,
where X represents a numeric value. The data display area indicates:
(
key controls different
POWER
[
)
key controls the output
POWER LEVEL
the active entry area displays:
HP 8360
User's Handbook
Advertisement
Chapters
Table of Contents
