Save Lock
Function Group
Menu Map 8
Description
Programming Codes
See Also
Save User Preset
Function Group
Menu Map 8
Description
Programming Codes
See Also
SYSTEM
This softkey lets you disable the save function. It prohibits the
saving of the present instrument state into a save/recall memory
register. If this function is active, an error message is displayed. An
asterisk next to the key label indicates that this function is active.
SYSTem:KEY:ENABle SAVe
Analyzer:
SHSV locks the registers, SHRC unlocks the registers.
"Saving and Recalling an Instrument State," in Chapter 1.
"Programming Typical Measurements," in Chapter 1.
SYSTEM
This softkey lets you store the present state of operation to be used
as the PRESET state. Set the synthesizer to the desired operating
conditions. Select Save User Preset . The display shows:
- - >
User Defined Preset Saved
To activate this stored information, you must set the preset mode to
User.
SCPI:
Analyzer:
NONE
Preset Mode User
"Changing the Preset Parameters," in Chapter 1.
HP 8360
User's Handbook