Markers All Off; Measure Corx All - HP 8360 User Handbook Manual

Markers All Off

Function Group
Menu Map
Description
Programming Codes
See Also
Measure Corr All
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User's Handbook
MARKER
3
This softkey lets you turn all the markers off. The frequency value
given to the markers remains in memory and will be recalled when
the marker softkeys are pressed again. Softkeys Amp1 Markers ,
markers off. The function (or the frequency values) is retained as the
synthesizer settings.
SCPI:
MARKer:AOFF
Analyzer:
SHMO
Markers ,
"Marker Operation," in Chapter 1.
"Programming Typical Measurements," in Chapter 1.
POWER
5
This softkey enables the synthesizer to act as a controller to
command an HP 437B power meter to measure flatness correction
values at all frequency points defined in the flatness array.
SCPI:
NONE
Analyzer:
NONE
"Creating and Applying the User Flatness Correction Array," in
Chapter 1.
Sweep are not affected by turning the
Sweep,(MARKER)
Operating and Programming Reference M-7
Measure Cm-r