Module Menu - HP 8360 User Handbook Manual

Module Menu

Function Group (ALC)
Menu Map 1
Description
Programming Codes
See Also
HP 8360
User's Handbook
This softkey accesses the source module selection softkeys.
Millimeter-wave source modules can be connected to the synthesizer
source module interface connectors (there is one each on the front
and rear panels). These softkeys give you the option of letting the
synthesizer automatically look at both connectors for source modules
or telling the synthesizer to look only at the front or at the rear
connector. You can also turn off module sensing completely.
Module
Select AUTO
M o d u l e
Select Front
Module Select Rear
Module Select None
SCPI:
NONE
Analyzer:
NONE
Sets the synthesizer to automatic
selection of the source module
(selects the front connector if source
modules are present at both front and
rear connectors). This is the default
after preset.
Sets the synthesizer to select the source
module connected to the front panel
source module interface connector.
Sets the synthesizer to select the source
module connected to the rear panel
source module interface connector.
Disables source module sensing.
Operating and Programming Reference M-23