Toro Groundsmaster 300 Series Service Manual page 14

GROUNDSMASTER
Minimum Recommended Maintenance Intervals:
Maintenance Procedure
Check Battery Fluid Level
Check Battery Cable Connections
Lubricate All Grease Fittings
Lubricate Brake Cables
Check Cutting Unit Gear Box Oil Level
Clean Under Cutting Unit Belt Covers
Check Cutting Unit Drive Belt Adjustment
Check PTO Belt Adjustment
Inspect Air Filter, Dust Cup, and Baffle
‡ Change Engine Oil and Filter
† Check Fan and Alternator Belt Tension
Inspect Cooling System Hoses
† Replace Transmission Oil Filter
Service Air Filter
Check Governor Oil Level
Decarbon Spark Arrestor Muffler
Check Rear Wheel Toe-In and Steering Linkage
† Torque Wheel Lug Nuts
Replace Fuel Filter
Change Transmission Oil
Change Cutting Unit Gear Box Oil
Replace Spark Plugs
Pack Rear Wheel Bearings
Torque Head, Adjust Valves, Check Engine RPM
† Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Coolant System - Flush/Replace Fluid
(See Operator's and Service Manual for specifications and procedures)
®
345 Maintenance Schedule
Maintenance Interval & Service
Every
50hrs
A Level
Service
Annual Recommendations:
Items listed are recommended every
1500 hours or 2 years whichever occurs
Every
Every
200hrs
100hrs
B Level
Service
C Level
Service
D Level
Service
first.
Every
400hrs