7. Connect the tie rod end to the spindle bracket with
one (1) nut. Tighten the nut to a torque of 25 - 33 ft-lb.
Install the jam nut and tighten against the other nut to
secure tie rod end.
®
Groundsmaster
300 Series
8. Install the lock nut and cap screw to secure the
steering cylinder rod end to the steering pivot. Tighten
the nut to 130 to 150 ft-lb.
9. Lubricate the bushings through the grease fitting on
the steering pivot.
Figure 16
Page 8 - 13
Repairs