26. Remove and discard the commutator seal from the
commutator cover (Fig. 44).
27. Remove the eleven hex socket head screws, that
hold the metering package together (Fig. 45). Use a
3/32 in. allen wrench. Inspect the screws for thread and
socket damage and replace as necessary.
28. Lift the commutator cover from the metering pack-
age (Fig. 46).
29. Inspect the ground surfaces of the commutator
cover. You should notice a "normal" polished pattern due
to the rotation of the commutator. If the cover has nicks,
burrs, or scoring, it must be replaced.
®
Groundsmaster
300 Series
Page 8 - 29
Figure 44
Figure 45
Figure 46
Repairs