Toro Groundsmaster 300 Series Service Manual page 18

GROUNDSMASTER
Minimum Recommended Maintenance Intervals:
Maintenance Procedure
Check Battery Fluid and Cable Connections
Lubricate Grease Fittings
Lubricate Brake Cables
Check Cutting Unit Gear Box Oil Level
Clean Under Cutting Unit Belt Covers
Check Cutting Unit Drive Belt Adjustment
Change Engine Oil
Check PTO Belt Tension
Inspect Air Filter, Dust Cup and Baffle
‡ Replace Engine Oil Filter
† Check Fan and Alternator Belt Tension
Inspect Cooling System Hoses
† Replace Transmission Oil Filter
Service Air Filter
Decarbon Spark Arrestor Muffler
Check Rear Wheel Toe-In and Steering Linkage
† Torque Wheel Lug Nuts
Replace Diesel/Water Separator Filter
Replace Electric Fuel Pump Filter
Check Fuel Lines and Connections
Change Cutting Unit Gear Box Oil
Pack rear wheel bearings (2WD)
Change Rear Axle Lubricant (4WD)
Change Transmission Oil
‡ Torque Head, Adjust Valves, and Check RPM
† Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Coolant System - Flush/Replace Fluid
Fuel Tank - Drain/Flush
(See Operator's and Service Manual for specifications and procedures)
®
322-D and 325-D Maintenance Schedule
Maintenance Interval & Service
Every
Every
100hrs
50hrs
A Level
Service
B Level
Service
Annual Recommendations:
Items listed are recommended every
1500 hours or 2 years whichever occurs
first.
Every
Every
400hrs
200hrs
C Level
Service
D Level
Service