Toro Groundsmaster 300 Series Service Manual page 198

Specifications
Item
__________________________________________________________________________________________
Front wheel lug nut torque
________________________________________________________________________________________________________________________ ________________________________
Front to rear housing torque
________________________________________________________________________________________________________________________ ________________________________
Transmission to axle torque
________________________________________________________________________________________________________________________ ________________________________
Differential bearing caps torque
________________________________________________________________________________________________________________________ ________________________________
Ring gear to differential case torque
________________________________________________________________________________________________________________________ ________________________________
Fill pipe torque
________________________________________________________________________________________________________________________ ________________________________
Side plate (gear cover) torque
________________________________________________________________________________________________________________________ ________________________________
Axle shaft bearing retainer (nut) torque
With hex head screw
With socket head screw (newer models)
________________________________________________________________________________________________________________________ ________________________________
Ring gear to pinion gear backlash
________________________________________________________________________________________________________________________ ________________________________
Pinion gear end play
Special Tools
NOTE: Order special tools from the TORO SPECIAL
TOOLS AND APPLICATIONS GUIDE (COMMERCIAL
PRODUCTS) . Some tools may be listed in the Parts
Differential Gear Holder
Remove gear cover from right hand side of differential
and bolt this tool in place to lock spur gear in position
when removing nut that secures drive shaft flange for
4WD drive shaft.
Special Tools
Catalog for your Toro equipment. Some tools may also
be available from a local supplier.
Page 7 - 2 Rev. A
Specification
45 to 55 ft-lb
18 to 28 ft-lb
25 to 30 ft-lb
30 to 45 ft-lb
45 to 65 ft-lb
20 to 30 ft-lb
25 to 40 in-lb
37 to 45 ft-lb
16 to 20 ft-lb
0.003 to 0.007 in.
0.00 to 0.005 in.
Figure 2
®
Groundsmaster 300 Series