Toro Groundsmaster 300 Series Service Manual page 271

44. Install the lock nuts onto the bolts. Tighten each nut
gradually until resistance is felt (Fig. 108). Tighten to a
torque of 20 - 24 ft-lb (27 - 33 Nm) in the sequence
shown (Fig. 109).
45. Tighten the plug to a torque of 8 - 12 ft-lb (11 - 16 Nm)
(Fig. 110).
®
Groundsmaster 300 Series Page 8 - 51
Figure 108
Figure 109
Figure 110
Repairs