Starter Interlock Relay - Toro Groundsmaster 300 Series Service Manual

Starter Interlock Relay (Fig. 11, 12, 13)
To test the relay (Fig. 11, Item 22 or Fig. 12, Item 42),
disconnect the relay wire connector and install a conti-
nuity tester between the relay terminals (terminals 30
and 87). The relay should make and break continuity at
terminals 30 and 87 as 12 V.D.C. is connected and
disconnected to terminal 85 with terminal 86 connected
to ground.
®
Groundsmaster 300 Series
(Groundsmaster 322-D/325-D)
Page 6 - 21
Figure 11
(Groundsmaster 345)
Figure 12
Figure 13
Testing