Siemens SINAMICS S120 Getting Started page 36

Creating the Drive Project OFFLINE
– Station address –> 0
– Transmission rate e.g.: 1.5 Mbit/s
– Highest station address e.g.: 126
– Profile –> DP
9. Click OK.
Fig. 3-7
10.Click Diagnostics.
You can use the diagnostic functions on the PROFIBUS/MPI Network
Diagnostics tab (see Fig. 3-8) to check whether the communication module for
the PROFIBUS line is ready.
3-36
Setting up the PG/PC interface
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
 Siemens AG 2006 All rights reserved