Siemens SINAMICS S120 Getting Started page 78

Creating the Drive Project ONLINE
Fig. 5-17
4. Work through the Wizard by choosing Continue > until you reach the point at
which you configure the motor (see Fig. 5-18).
Note
You only have to change the motor configuration; leave the infeed etc. as they are.
6. Select the motor
according to type
(Order No.).
Fig. 5-18
5-78
Project Wizard
Motor configuration
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
Work through the Wizard,
with Continue >!!!!
5. Select the motor type.
 Siemens AG 2006 All rights reserved