Siemens SINAMICS S120 Getting Started page 79

Hide thumbs Also See for SINAMICS S120:

Table of Contents

5. Select the motor type e.g.:

– 1FK6 synchronous motor or

– 1PH7 induction motor

6. Choose the appropriate motor from the Motor selection field according to type

(Order No.) (see type plate) and assign a name (Drive_1_Motor).

7. Click Continue > and work through the Wizard until the summary is displayed

(see Fig. 5-19).

Note

You only have to change the motor configuration; leave the infeed etc. as they are.

Fig. 5-19

8. Click Finish.

Before saving the project, check the topology in STARTER.

Fig. 5-20

SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition

Summary

Device configuration

Creating the Drive Project ONLINE

Click

Check topology.

5-79

Table of Contents