Siemens SINAMICS S120 Getting Started page 49

Fig. 3-24
16.Choose the "Standard" and the "Power unit application" as shown in Fig. 3-24
(the default setting can be left as it is).
17.Click Continue > to select the motor (see Fig. 3-25).
Synchronous
motor
18. Select the motor type.
Fig. 3-25 Motor configuration
18.Select the motor type e.g.:
 Siemens AG 2006 All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
Drive settings
Creating the Drive Project OFFLINE
Induction motor
19. Select the motor
according to type
(Order No.).
3-49