Creating the Drive Project OFFLINE
Fig. 3-20
8. For the infeed in this example, you want a free telegram configuration with
BICO interconnection. Confirm the default setting Free telegram configura-
tion with BICO by choosing Continue >.
Fig. 3-21
9. You now want to create a drive with a Motor Module (power section), motor,
and encoder for this example. Confirm the default setting Yes by choosing
Continue >.
3-46
SINAMICS_CU320 configuration – PROFIBUS process data exchange (infeed)
SINAMICS_CU320 configuration – Introduction to the drive
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
Siemens AG 2006 All rights reserved