Siemens SINAMICS S120 Getting Started page 47

Fig. 3-22
10.The drive properties dialog box (see Fig. 3-22) contains general information
about the drive.
11. In the selection field, choose "Operating type".
– Servo: when you are configuring a synchronous motor with servo control
– Vector: when you are configuring an induction motor with vector control
12.Assign a name for the first drive, Drive_1, and enter some general comments.
Click Continue >.
13.In the "Control structure" dialog box, select the "control type" (the default setting
is standard and can be left as it is) and click on Continue >.
 Siemens AG 2006 All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
Drive properties
Creating the Drive Project OFFLINE
Choose Servo or
Vector.
3-47