Siemens SINAMICS S120 Getting Started page 80

Creating the Drive Project ONLINE
9. Click Check topology.
Choose
Project > Save.
Fig. 5-21
10.In this window, check the topology and DRIVE–CLiQ connection and compare
this with the actual topology (see Fig. 5-21).
11. Choose Project > Save and save the project under the name "Project_1".
To start the motor, continue by carrying out the steps described in Chapter 4.
5-80
Topology tree
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
 Siemens AG 2006 All rights reserved
J