Siemens SINAMICS S120 Getting Started page 51

Synchronous
motor
Fig. 3-27 Encoder configuration
22.Select the encoder from the Motor encoder selection selection field according
to type (Order No.) (see the type plate on the motor) and then press OK.
23.Click on Continue > to select the process data exchange in the next step (see
Fig. 3-28).
 Siemens AG 2006 All rights reserved
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
Creating the Drive Project OFFLINE
Induction motor
3-51