Configure The Drive Unit - Siemens SINAMICS G150 Operating Instructions Manual

5.3.2

Configure the drive unit

In the project navigator, open the component that contains your drive unit.
Figure 5-12 Project navigator – Configure drive unit
⇒ In the project navigator, click the plus sign next to the drive unit that you want to configure.
The plus sign becomes a minus sign and the drive unit configuration options are displayed
as a tree below the drive unit.
⇒ Double-click Configure the drive unit.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
5.3 Procedure for commissioning via STARTER
Commissioning
211