6.4.4
"PROFIdrive NAMUR" default setting
Prerequisites
The NAMUR terminal block (option B00) is installed in the cabinet unit.
The "PROFIdrive" default setting was chosen during commissioning:
• STARTER:
• AOP30:
Command sources
Figure 6-15
Priority
The priority of the command sources is shown in the diagram "Command sources -
AOP30←→PROFIdrive NAMUR".
Note
The EMERGENCY STOP and motor protection signals are always active (regardless of the
command source).
All of the supplementary setpoints are deactivated for LOCAL master control.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
"PROFIdrive Namur"
"10: PROFIdrive Namur"
Command sources - AOP30←→PROFIdrive NAMUR
Operation
6.4 Command sources
281