Characteristics, Quality, Service - Siemens SINAMICS G150 Operating Instructions Manual

Device Overview
2.2 Applications, features
2.2.2

Characteristics, quality, service

Features
The accuracy of sensorless vector control ensures that the system can be used for a wide
variety of applications and, as a result, an additional speed sensor is not required.
Optionally, applications with system-specific requirements for an encoder can use an
encoder evaluator.
SINAMICS G150 takes this into account and, as a result, offers a low-cost drive solution
tailored to actual requirements.
In addition, factors have been considered to ensure easy handling of the drive from the
planning and design phase through to operation. These factors include:
● Compact, modular, service-friendly design
● Straightforward planning/design and commissioning thanks to the SIZER and STARTER
● Ready to connect to facilitate the installation process
● Quick, menu-driven commissioning with no complex parameterization
● Clear and convenient drive monitoring/diagnostics, commissioning and operation via a
● SINAMICS is an integral part of Totally Integrated Automation (TIA). The TIA concept
● Integration in SIMATIC H systems is possible via a Y link.
● Drive Control Chart (DCC)
22
tools.
user-friendly graphical operator panel with measured values displayed in plain text or in a
quasi-analog bar display.
offers an optimized range of products for automation and drive technology. This concept
is characterized by planning / design, communication, and data management procedures
that are consistent throughout the product range. SINAMICS is totally integrated in the
TIA concept.
Separate S7/PCS7 blocks and faceplates for WinCC are available.
Drive Control Chart (DCC) expands the facility for the simplest possible configuring of
technological functions for the SINAMICS drive system.
The block library encompasses a large selection of closed-loop, arithmetic and logic
function blocks, as well as more comprehensive open-loop and closed-loop control
functions. The user-friendly DCC editor enables easy graphical configuration and a clear
representation of control loop structures as well as a high degree of reusability of existing
diagrams. DCC is an add-on to the STARTER commissioning tool.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A