Transportation And Storage - Siemens SINAMICS G150 Operating Instructions Manual

Mechanical installation

3.2 Transportation and storage

3.2 Transportation and storage
Transportation
The following must be taken into account when the devices are transported:
• The devices are heavy or generally top heavy. The center of gravity is marked on the
• Suitable hoisting gear operated by trained personnel is essential due to the weight of the
• The devices must only be transported in the upright position indicated. The devices
• Serious injury or even death and substantial material damage can occur if the devices
Note
Notes regarding transportation
• The devices are packaged by the manufacturer in accordance with the climatic conditions
• The notes on the packaging for transportation, storage, and proper handling must be
• For transportation using forklifts, the devices must be set down on a wooden pallet.
• When the devices are unpacked, they can be transported using the optional transport
• Shock / tilt indicators are affixed to the packaging to detect unacceptable impact or tilting
• Permissible ambient temperatures:
40
WARNING
devices.
devices.
must not be transported upside down or horizontally.
are not lifted or transported properly.
and stress encountered during transit and in the recipient country.
observed.
eyebolts (option M90) or rails on the cabinet unit. The load must be distributed evenly.
Heavy blows or impacts must be avoided during transit and when the devices are being
set down, for example.
of the cabinet unit during transport (see Chapter "Transport Indicators").
Ventilation: -25 to +70°C, class 2K3 to IEC 60 721-3-2
Briefly down to -40 °C for max. 24 hours
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A