Toshiba MJ-1027 Service Manual page 135

7. Removing the Tray-2 Unit
1) Remove the tray-1 unit.
2) Disconnect the harness band [1] of the tray-
2 from the bracket [2].
3) Disconnect 1 connector [3] and remove 1
screw [4].
4) Lift the tray-2 unit to remove.
8. Removing the Tray-1 and -2 Lift
Motor
1) Remove the tray -1/-2.
2) Remove two screws [1], and two lift blocks
[2].
3) Remove the five screws [3], and remove the
tray from the tray unit.
4) Remove the cable from 4 cable hooks of
the tray lower cover [1], and then remove 5
screws [3].
5) Release 2 hooks [4] to remove the tray
frame [5] from 2 hooks [6] the tray lower
cover.
CHAPTER 4 MECHANICAL CONSTRUCTION
[1]
Figure 4-110
[2]
[3]
Figure 4-111
[5]
[3]
[2]
[2]
Figure 4-112
[2]
[4]
[3]
[2]
[1]
[3]
[6]
[3]
[4]
[1]
4-5