Toshiba MJ-1027 Service Manual page 148

CHAPTER 4 MECHANICAL CONSTRUCTION
11) Remove the screw [5].
12) Remove the two screws [6], and remove the
saddle stitcher unit [7] by moving it in the
pick-up direction.
Caution:
When removing the saddle stitcher unit from
the finisher unit body, prevent the timing belt
[8] from catching on the communications
cable bracket [9].
4-18
[5]
Figure 4-211
[6]
Figure 4-212
[9]
Figure 4-213
[6]
[7]
[8]