Table Of Contents - Toshiba MJ-1027 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
I. FEATURES .................................. 1-1
II. SPECIFICATIONS ....................... 1-2
A. Specifications ........................... 1-2
B. Cross Section ........................... 1-7
III. Using the Machine ....................... 1-9
A. Removing Paper Jams from the
Finisher Unit ............................. 1-9
B. Supplying the Finisher Unit with
Staples ................................... 1-10
C. Removing Staple Jams from the
Finisher Unit ........................... 1-12
D. Removing Paper Jams from the
Saddle Stitcher Unit
(Saddle Stitch Finisher) .......... 1-13
CHAPTER 2 FINISHER UNIT BASIC OPERATION
I. BASIC OPERATION .................... 2-1
A. Outline ...................................... 2-1
B. Outline of Electrical Circuitry .... 2-2
C. Inputs to and Outputs from the
Finisher Controller PCB ........... 2-4
II. FEED/DRIVE SYSTEM ............. 2-10
A. Outline .................................... 2-10
B. Type of Delivery Paths ............ 2-15
C. Feeding and Delivering .......... 2-18
D. Job Offset ............................... 2-21
CONTENTS
E. Supplying the Saddle Stitcher
Unit with Staples
(Saddle Stitch Finisher) .......... 1-15
F. Removing Staple Jams from the
Saddle Stitcher Unit
(Saddle Stitch Finisher) .......... 1-16
IV. MAINTENANCE BY THE
USER ........................................ 1-18
A. Maintenance by the User ....... 1-18
E. Staple Operation .................... 2-24
F. Stapler Unit ............................ 2-32
G. Tray Operation ........................ 2-38
H. Detecting the Height of
Stack on the Tray .................... 2-40
I. Shutter Operation ................... 2-42
J. Buffer Path Operation ............. 2-46
K. Detecting Jams ...................... 2-51
III. POWER SUPPLY SYSTEM ....... 2-56
iii