Removing Staple Jams From The Saddle Stitcher Unit (Saddle Stitch Finisher) - Toshiba MJ-1027 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
6) Pull the stitcher to the front once, and then
return it to its original position.
Figure 1-335
7) Push in the stitcher unit, and close the front
cover.
Figure 1-336
1-16
F. Removing Staple Jams
from the Saddle Stitcher
Unit (Saddle Stitch Fin-
isher)
If the host machine indicates the saddle
stitcher unit staple jam message, perform the
following to remove the jam.
1) Open the front lower cover.
Figure 1-337
2) Slide out the stitcher unit.
Figure 1-338
3) Pull the stapler of the stitcher unit to the
front once, and then shift it up.
Figure 1-339