Supplying The Saddle Stitcher Unit With Staples (Saddle Stitch Finisher) - Toshiba MJ-1027 Service Manual

E. Supplying the Saddle
Stitcher Unit with Staples
(Saddle Stitch Finisher)
If the host machine indicates the saddle
stitcher unit staple supply message, perform the
following to supply it with staples.
1) Open the front lower cover.
Figure 1-330
2) Slide out the stitcher unit.
Figure 1-331
CHAPTER 1 GENERAL DESCRIPTION
3) Pull the stitcher unit to the front once, and
then shift it up.
Figure 1-332
4) Hold the empty cartridge on its sides, and
remove it.
Figure 1-333
5) Set a new cartridge.
Figure 1-334
Reference
You must always replace both cartridges at
the same time.
1-15