Toshiba MJ-1027 Service Manual page 21

4) Hold the empty staple case on its sides, and
slide it out.
Figure 1-311
5) Set a new staple case.
Figure 1-312
Reference:
You may set no more than one staple
cartridge at a time.
Make sure that the new cartridge is one
specifically designed for the finisher unit.
CHAPTER 1 GENERAL DESCRIPTION
6) Pull the length of tape (used to hold the
staples in place) straight out.
Figure 1-313
7) Push in the stapler unit until the green le-
ver returns to its original position.
Figure 1-314
8) Check to make sure that the stapler has
been locked in place, and close the front
cover.
Figure 1-315
1-11