Toshiba MJ-1027 Service Manual page 146

CHAPTER 4 MECHANICAL CONSTRUCTION
3) Remove the harness leads from the harness
stop [5] and edge saddle [6].
4) Disconnect the two connectors [7], and re-
move the saddle stitcher delivery tray as-
sembly [8].
5. Removing Upper Delivery Guide
Assembly
1) Remove the grate-shaped lower guide (see
I-A-10).
2) Remove the two screws [1] and ground lead
[2], and remove the upper delivery guide
assembly [3].
6. Removing the PCB Cover
1) Remove the four screws [1], and remove
the PCB cover [2].
4-16
[6]
Figure 4-206
[2]
[1]
Figure 4-207
[1]
[2]
Figure 4-208
[5] [7]
[8]
[1]
[3]
[1]