Toshiba MJ-1027 Service Manual page 152

CHAPTER 4 MECHANICAL CONSTRUCTION
10) Remove the two bearings [12].
11) Open the saddle stitcher delivery tray as-
sembly [13].
12) Remove the two screws [14], and remove
the two alignment plates [15].
13) Slide the paper folding roller [16] to the
front, and pull it out in the delivery direc-
tion.
3. Installing the Paper Folding Roller
1) Attach the gear [2] so that the grooved sec-
tion [1] on the gear is facing the grooved
section [1] on the paper folding roller to
align the phases.
4-22
[12]
Figure 4-220
[14]
[15]
Figure 4-221
[2]
Figure 4-222
[16]
[14]
[13]
[1]