III. Using the Machine
A.
Removing Paper Jams
from the Finisher Unit
If the host machine indicates the finisher
paper jam message, perform the following to
remove the jam.
1) Pressing the release button of the finisher,
move the finisher carefully away from the
host machine.
Figure 1-301
2) Remove any jam visible from the outside.
Figure 1-302
CHAPTER 1 GENERAL DESCRIPTION
3) Open the upper cover, and check the in-
side of the finisher.
Figure 1-303
4) Lift the buffer roller cover, and remove the
jam.
Figure 1-304
5) Lift the buffer roller, and remove the jam.
Figure 1-305
1-9