Toshiba MJ-1027 Service Manual page 65

CHAPTER 2 FINISHER UNIT BASIC OPERATION
b. Rear 1-Point Stapling
The stapler is kept in wait at the center position. The stapler is moved to and from the stapling
position for each stapling operation.
Stapling tray delivery
direction
c. Rear Diagonal Stapling
For A4, LT and B5 sizes, the stapler is kept in wait toward the rear away from the stapling
position. The stapler is moved to and from the stapling position for each stapling operation.
Stapling tray delivery
direction
2-36
Stopper
Stopper
Guide plate
Figure 2-236
Stapler
Stopper
Stopper
Guide plate
Figure 2-237
Stapling position
Wait position
Stapler
Wait position
Stapling position