Toshiba MJ-1027 Service Manual page 82

4. Buffer Path Paper Sensor Stationary Jam
The sheet does not move past the buffer inlet sensor when an equivalent of twice the feeding
length of the sheet has been fed after the sensor turned on.
Equivalent of size x 2
Jam check
Buffer path paper
sensor (PI14)
First feed motor (M1)
5. Delivery Sensor Delay Jam
a. Straight Path
The delivery sensor does not detect paper when an equivalent of 476 mm has been fed after the
inlet sensor turned on.
Equivalent of 476 mm
Jam check
Inlet sensor (PI1)
Delivery sensor (PI3)
First feed motor (M1)
Second feed motor
(M8)
CHAPTER 2 FINISHER UNIT BASIC OPERATION
Jam check
Normal
Buffer path paper
sensor (PI14)
First feed motor (M1)
Figure 2-260
Jam check
Normal
Inlet sensor (PI1)
Delivery sensor (PI3)
First feed motor (M1)
Second feed motor
(M8)
Figure 2-261
Equivalent of size x 2
Jam
Equivalent of 476 mm
Jam
2-53