Supplying The Finisher Unit With Staples - Toshiba MJ-1027 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
6) Return the buffer roller and the buffer roller
cover to their original positions, and close
the upper cover.
Figure 1-306
7) Connect the finisher to the host machine.
Figure 1-307
8) Operate as instructed on the display.
1-10
B. Supplying the Finisher
Unit with Staples
If the host machine indicates the finisher
unit staple supply message, perform the fol-
lowing to supply it with staples.
1) Open the front cover.
Figure 1-308
2) Shift down the green lever.
Figure 1-309
3) When the staple cartridge has slightly slid
out, hold and pull it out.
Figure 1-310